MultiTest™ Silicate

  • Measures silicates to less than 0.5 mg/L
  • Multi-cavity plate for simultaneous testing of up to 6 tests at the same time
  • Includes reference for test validation
  • Marine and freshwater

Natural sea water contains about 10 mg/L as silicate. In reef or other marine aquaria, silicate should be 1 mg/L or less. Silicate is non-toxic to fish and invertebrates, but is ideally kept below 1 mg/L to minimize diatomaceous algae. In freshwater, silicate is not critical. Usually, freshwater silicate concentrations will range in the area of 4–20 mg/L.

MultiTest™ Silicate measures silicates to less than 0.5 mg/L in marine or freshwater. This kit measures soluble silicate and reports it as silicate concentration. To convert to silicon, multiply by 0.3. It performs over 75 tests and contains a reference sample for validation.

Features

75 Tests

MultiTest™ Silicate performs over 75 tests

And with the multi-cavity test plate, multiple tests can be run at the same time.

Accuracy

Range

Measures between 0–25 mg/L silicate

Precision

Detectable changes on the color chart in 0.1–1 mg/L & 0.01–0.1 mg/L increments

Reference Sample

It isn't necessary to run a reference test to use this kit; however, its proper performance can be validated by running a test in the normal manner except that the reference sample is used in place of aquarium sample. You might choose to run a reference test if you have cause to believe the test is giving incorrect results.

Color Chart

All MultiTest™ test kits come with an easy-to-read color chart. It features a 5 cm viewing window to help isolate color and match as closely as possible to the test sample

Opaque Multi-Cavity Test Plate

All MultiTest™ test kits are read from an opaque white test plate. The sliding color chart along with the six-cavity test plate allows for easy reading and comparisons of several samples at the same time.

MultiTest™ Silicate Kit Contents

  • Silicate Reagent 1a
  • Silicate Reagent 1b
  • Silicate Reagent 2
  • Silicate Reagent 3
  • Silicate Reference
  • Stir Rod
  • Low Range Cuvette
  • Sample Pipette
  • Silicate Color Chart
  • Multi-Cavity Test Plate
  • Instructions

Can't find what you're looking for? Ask us a new question. One of the experts from our technical support staff will be happy to promptly respond. You can also call 888‑732‑0003 (Monday- Friday 9:00 AM - 5:00 PM EST) if you would like to speak directly with a technical support representative.

KEEP AWAY FROM CHILDREN! This kit is not a toy. Reagents 1a & 1b contain sulfuric and molybdic acids and are corrosive! Reagents are corrosive to skin, metals, and fabrics. Avoid contact. Protect work surfaces with plastic liner or newspaper. If accidental spillage or contact occurs, wash exposed area thoroughly and rinse copiously with water. If eye entry occurs, rinse eyes immediately with water for 10 minutes and then seek medical attention.

0976 MultiTest: Silicate